Front Fork Slide Bushes 50.70x20.00x1.00mm Clamps the fork was equipped with

the fork was equipped with linear springs

with more resistance at higher speeds

Is your motorcycle's front end feeling vague

The dual passages allow fluid or gas to flow through the bolt

The rear receives a slightly firmer spring with tuned rebound/compression damping and a larger adjustment range than stock

Front Fork Slide Bushes 50.70x20.00x1.00mm Clamps the fork was equipped withK Tech front fork slide bushes are a direct replacement and manufactured to the exact standards of the original equipment parts. They are manufactured from hardened steel and coated with copper for added protection. The contact surfaces are a PTFE material designed to give low friction on the moving parts. All guide bushes are supplied in pairs and available for most fitments.